Leadtek Quadro Series General Manual page 25

Accomplishing NVIDIA Control Panel Tasks
• Change the image and rendering settings of your 3D applications and games
that utilize Direct3D and OpenGL technology
• Assign specific 3D settings to a game so that these settings automatically load
when a game is launched (available under Advanced view)
• Set up your SLI or multi-GPU configuration
Note: GPU temperature monitoring and GPU overclocking features are not
included in the 3D Settings page in Release 95 and later. To use this
functionality you must install NVIDIA nTune software.
Using the Workstation Category Pages
The Workstation category is available if you have an NVIDIA Quadro FX
graphics card installed.
Note: For Windows Vista - Workstation features under Windows Vista are in
development and may not be available with your ForceWare graphics
driver version. Consult the release notes for the latest list of unsupported
features.
The actual tasks available depend on which NVIDIA Quadro FX product you
have installed. Use the Workstation page to:
• Synchronize your displays using frame sync or genlock technology
• View a graphical representation of the displays and graphics cards installed on
your system.
• Manage serial digital interface (SDI) output (requires NVIDIA Quadro FX SDI
solution.)
• Overlap the edges of adjacent displays.
Note: Display edge blending is no longer available.
Leadtek Quadro Series General Guide 1-23