Operating The Remote Controller - Gorenje R51M/E User Manual

Operating the remote controller

AUTO operation
COOL/ HEAT (Cooling only model without) and FAN operation
Switch on the power and the OPERATION indication
lamp on the display panel of the indoor unit starts
flashing.
1. Use the MODE button to select AUTO.
2. Push the TEMP button to set the desired room
temperature. Temperature can be set between
17°C
and 30°C.
3. Push the ON/OFF button to start the air conditioner.
NOTE
In the AUTO mode, the air conditioner can logically
choose the mode of COOL, FAN and HEAT by
sensing the difference between the actual ambient
room temperature and the set temperature on the
remote controller. In the AUTO mode you cannot
switch the fan speed. It is automatically controlled.
If the AUTO mode is not comfortable for you, the
desired mode can be selected manually.
Ensure that unit is plugged in and power is available.
1. Press the MODE button to select COOL,
HEAT or FAN mode.
2. Press the UP / DOWN buttons to set the
desired temperatures within range of 17 to
30°C.
3. Push the FAN SPEED to select the FAN
mode of AUTO, HIGH, MED or LOW.
4. Push the ON/OFF button to start the air
conditioner.
NOTE
The FAN mode cannot be used to control the
temperature.
While in this mode, only steps 1, 3 and 4 may
be performed.
7