Features Of The Remote Controller Buttons - Gorenje R51M/E User Manual

Features of the remote controller buttons

recessed RESET button, all current settings are cancelled and the control will
return to the initial settings.
7. AIR DIRECTION Button: Press this button to change the swing angle of the
louver. The swing angle of the louver is 6o for each press. When the louver
swing at a certain angle which would affect the cooling and heating effect of
the air conditioner, it would automatically change the swing direction. No
symbol will appear in the display area when press this button. (Not applicable
to units without this function).
8. FAN SPEED Button: Press the FAN SPEED button to select the desired fan
speed setting (Auto-Low-Med-High).
9. TIMER ON Button: Press this button to initiate the auto-on time sequence.
Each press will increase the auto-timed setting in 30 minutes increments.
When the setting time displays 10:00, each press will increase the auto-timed
setting 60 minutes increments. To cancel the auto-timed program, simply
adjust the auto-on time to 0:00.
10. EONOMIC Button: Press this button to go into the Energy-Saving operation
mode. Press the button again to cancel.
11. TIMER OFF Button: Press this button to initiate the auto-off time sequence.
Each press will increase the auto-timed setting in 30 minutes increments.
1. DOWN button (▼ / -): Push this
button to decrease the indoor
temperature setting or to decrease hour
on the timer setting.
2. UP button (▲ / +): Push this button to
increase the indoor temperature setting or
to increase hour on the timer setting.
3. ON/OFF Button: Push this button to
start operation, push the button again to
stop operation.
4. MODE Selection Button: Each time
the button is pressed, the operation mode
is shifted.
5. Horizontal swing button: Push this
switch button to activate auto
swing feature of the horizontal louver.
Push it again to stop.
6. RESET Button: When you press the
4