Sony ICD-P630F Quick Start Manual page 6

1
Display the clock setting display.

Press DISPLAY/MENU for more than
1 second until "MODE" appears in the
display window.
The unit enters the menu mode.

Press – 
DATE. "


Press PLAY/ENTER.
The year digits will flash.
2
Set the date.


Press –
digits of the year.

Press  PLAY/ENTER.
The month digits will flash.

Set the month and day in sequence,
then press 
The hour digits will flash.
Tip

To set the date to Year 2008, display "08Y. "

GB
or  + to display "SET

or + to select the
PLAY/ENTER.
3
Set the time.

Press –  or
digits of the hour.

Press  PLAY/ENTER.
The minute digits will flash.

Set the minute.

Press  PLAY/ENTER at the time
signal.
The display will return to "SET DATE. "

Press  (stop) to exit from the menu
mode.
If the unit is left unused for more
than 3 seconds in the stop mode, the
display will show the current time.
Tips

This unit does not have a power on/off

switch. The display is shown at all times.
You can select the 12-hour display using the

menu. To set the 12-hour display, select "12H"
in the "HOUR" menu. In that case, "AM12:00"
will appear in step 2- 
 + to select the
.