New Holland SmartTrax T8.320 Service Manual page 78

7. Install the plate (1) for the right hand rear engine mount
with the bolts (2) removed earlier.
8. Torque the bolts to 125 - 150 N·m (92.2 - 110.6 lb ft).
9. Install the bolts (3) removed earlier, and torque to 125
- 150 N·m (92 - 111 lb ft).
10. Install the hood support bolt and washer (4) and torque
to 125 - 150 N·m (92 - 111 lb ft).
11. Using the alignment marks (1) made earlier, attach the
engine output drive shaft to the engine flywheel.
12. Using the four bolts (2) removed earlier to secure the
drive shaft to the flywheel.
13. Torque the bolts to 101 - 113 N·m (75 - 83 lb ft).
14. Install the engine output drive shaft cover (1). Use the
bolts (2) removed earlier to secure the cover to the
flywheel housing.
15. Connect the harness connector to the engine con-
troller (1).
Engine - Engine and crankcase
47917992 25/09/2015
10.1 [10.001] / 51
5
RCPH10CCH925AAB
6
RCPH10CCH817AAB
7
RCPH10CCH813AAB
8
RAIL13TR04226AA