New Holland SmartTrax T8.320 Service Manual page 64

Torque turn tool
380001001 - Generic 0.5 in and 0.75 in drive
Recommended
Level 1 - One at every dealer location
Included in kits:
Flywheel stop tool
380000144 - Cursor® 9, 10, and 13
Mandatory
Level 2 - Internal repair: one set by dealer
Included in kits:
Cylinder sleeve removal tool
380000366 - Cursor® 8, 9, 10, and 13
(Tool works with specific rings)
Mandatory
Level 2 - Internal repair: one set by dealer
Included in kits:
Cylinder sleeve removal rings
380000152 - Cursor® 8 and 9 ( 115 mm)
380000153 - Cursor® 10 ( 125 mm)
380000116 - Cursor® 13 ( 135 mm)
(Used with the 380000366 sleeve pulling tool)
Recommended
Level 2 - Internal repair: one set by dealer
Included in kits:
Engine - Engine and crankcase
47917992 25/09/2015
10.1 [10.001] / 37
17
380001001
18
380000144
19
380000366
20
380000116