17. Connect two steering cylinder hoses (1).
18. Connect the suction hose (2) and install the two
clamps (1).
19. Connect the pressure tubes (4) and (5) and install the
bolts (3).
20. Connect the connections of the existing wire har-
nesses between the cab and the engine.
21. Connect the negative battery cable (1).
22. Fill the hydraulic system with new oil. Consult the
procedures in Powered rear axle - Filling (27.100).
Engine - Engine and crankcase
47705279 11/09/2014
10.1 [10.001] / 14
11
CUIL14TR00794AA
12
CUIL14TR00109AA
13
CUIL14TR00801AA
14
CUIL14TR00227AA