Sony Walkman NWZ-S515 Operation Manual page 106

10
10
Troubleshooting
Operation
(continued)
Symptom
Transferred data cannot
be found.
The volume is not loud
enough.
There is no sound from
the right channel of the
headphones.
Or the right channel
sound is heard from both
sides of the headphones.
Playback has stopped
suddenly.
Cause/Remedy
 The built-in flash memory of the player was
formatted using Windows Explorer.
 Format the built-in flash memory on the player
(  page 88).
 The supplied USB cable was disconnected from the
player while data was being transferred.
 Transfer usable files back to your computer and
format the built-in flash memory on the player
(  page 88).
 After dragging and dropping in Windows Explorer,
data hierarchy levels do not correspond to the player
(  page 95).
 Transferred files are not in a playable format. For
details, see "Supported file format" of
"Specifications" (  page 127).
 Convert the ATRAC audio data using the
supplied MP3 Conversion Tool.
 Songs or videos (NWZ-S615F/S616F/S618F only)
may not play back, depending on the file format
(  page 127).
 Photos may not be displayed, depending on the
file size or the file format (  page 127).
 "AVLS (Volume Limit)" is enabled.
 Disable "AVLS (Volume Limit)" (  page 76).
 The headphone jack is not fully inserted.
 If the headphones are not connected correctly,
sound will not be output properly. Insert the
connecting pin of the headphones into the jack
until it clicks (  page 10).
 The remaining battery power is insufficient.
 Charge the battery by connecting the player to
your computer (  page 92).
 The songs or video files (NWZ-S615F/S616F/S618F
only) that cannot be played are played.
 Play back the other song or video files (NWZ-
S615F/S616F/S618F only).
Continued 