Operation; Control Panel And Remote Control - LG PA11WS Owner's Manual

OPERATION

20
OPERATION

Control Panel and Remote Control


Power ( )
Press to turn the air conditioner ON or OFF.
Operation Mode
Press the Mode button to cycle between 3
types of air conditioner operation: Cool/ Dry /
Fan.
Cool - This mode is ideal on hot days to cool
and dehumidify the room quickly. Use the
buttons to set the desired room
temperature and use the Fan Speed button to
set the desired fan circulation speed.
Dry - This mode is ideal for rainy and damp
days to dehumidify the room rather than cooling
it significantly. Humidity is removed from the
room by the combination of compressor
operation and the fan speed fixed at Low. The
compressor and fan turn off once the set
temperature is reached. Fan speed cannot be
adjusted in Dry mode.
Fan - In this mode the fan circulates air but the
compressor does not run. Use the Fan Speed
button to set fan speed to High, Mid or Low. In
this mode, you cannot adjust the set
temperature.
NOTE
• Press the Mode button for 3 seconds to lock
mode.
Energy Saving
Press the Energy Saving button while
operating the air conditioner to start the energy
saving cooling.
When using energy saving mode, desired
temperature can be adjusted automatically to
save electricity bills.
NOTE
• Each time the energy saving button is pressed,
energy saving cooling → normal operation is
repeated.
• If the desired temperature set before energy
saving cooling is below 22 °C, the desired
temperature is automatically reset to 22 °C.
• Energy saving cooling is automatically
operated in accordance with the indoor
environment, so it may be different from the
remote control settings and display contents.
• Energy saving cooling can be selected only
during cooling operation.
Fan Speed
Press to set the fan speed to Low (F1), Mid
(F2), or High (F3).