Operation Instructions; Operation Modes - LG MW121C4 NHM0 Owner's Manual

OPERATION INSTRUCTIONS

Operation Modes

Selecting Mode a
Each time MODE button is pressed, the operation mode is changed
in sequence:
COOLING DRY
NOTE
• Heating mode is not available for cooling only air conditioner.
FAN Mode b
Each time the "Fan Speed" button is pressed, the fan speed is
changed in sequence:
Auto
NOTE
• At "Fan Only" mode, only "High","Medium" and "Low" are
available.
• At "Dry" mode, Fan speed is set at "Auto" automatically, "Fan
Speed" button is ineffective in this case.
Setting Temperature c
Press once to raise temperature setting by 1 °C
Press once to lower temperature setting by 1 °C
Range of available set temperature
*Heating, Cooling
*Dry
Fan Only
NOTE
• Heating mode is not available for cooling only models.
• At "Dry" mode, the unit can decrease or rise 2 °C if you still feel uncomfortable.
Turning On d
Press button, when the appliance receives the signal, the indicator of the indoor unit lights up.
NOTE
• Swing, Smart, Timer On, Timer Off, Clock, Sleep and Jet Mode operation modes will be specified in the
following pages.
• Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
• During heating operation, air flow is not discharged at the beginning. After 2-5 minutes, the air flow will
be discharged until temperature of indoor heat exchanger rises.
• Wait 3 minutes before restarting the appliance.
FAN ONLY
High Medium
16 °C ~ 30 °C
Inverter -7 ~ 7
Non-Inverter -2 ~ 2
Unable to set
HEATING
Low
Dual Light
Sensing Off
Fan
Mode
Speed
Temp.
Jet
Smart
Mode
Room
Temp
Swing Swing
Clock Sleep
Timer Timer
On Off
EN
15