LG PA11WS Owner's Manual page 5

• If the cord/plug is damaged, have it replaced by an authorized service
person using authorized replacement parts.
• Use a dedicated circuit.
• Do not disassemble or modify the product.
• Adhere to all industry recommended safety procedures including the
use of long-sleeved gloves and safety glasses.
• Use care when unpacking and installing. The edges of the product may
be sharp.
• Disconnect the power cord or circuit breaker before installing or
servicing the appliance.
• Keep packaging materials out of the reach of children. These materials
can pose a suffocation risk to children.
• Store and install the product where it will not be exposed to
temperatures below freezing or exposed to outdoor weather conditions.
• Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance.
• Do not input air or gas into the system except with the specific
refrigerant.
• Use non-flammable gas (nitrogen) to check for leak and to pur
using compressed air or flammable gas may cause fire or explos
• Keep level parallel in installing the product. Otherwise, it may cause
vibration or water leakage. It may cause injury or an accident.
• Do not install the unit in potentially explosive atmospheres.
• Compliance with national gas regulations shall be observed.
• When mechanical connectors are reused indoors, sealing parts shall be
renewed.
• When flared joints are reused indoors, the flare part shall be
re-fabricated.
• Mechanical connections (mechanical connectors or flared joints) shall be
accessible for maintenance purposes.
SAFETY INSTRUCTIONS
ge air;
ion.
EN
5