Table of Contents
Advertisement
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
Remove the 8 screws 1.
1.
2.
Remove the Back Cabinet in the direction of arrow.
Front Cabinet
1
1
1
1
Back Cabinet
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
2.
Disconnect the following connectors:
(CP801, CP802B, CP803 and CP852).
3.
Remove the CRT PCB in the direction of arrow.
Front Cabinet
All manuals and user guides at all-guides.com
DISASSEMBLY INSTRUCTIONS
1
1
1
1
Fig. 1-1
CRT PCB
CP852
CP803
CP802B
CP801
Fig. 1-2
1-3: AV/POWER/DVD BLOCK (Refer to Fig. 1-3)
Remove the 2 screws 1.
1.
2.
Disconnect the following connectors:
(CP303, CP404, CP6402 and CP5902).
3.
Remove the AV/Power/DVD Block in the direction of arrow.
Front Cabinet
1-4: USB PCB (Refer to Fig. 1-4)
Remove the 4 screws 1.
1.
2.
Remove the USB PCB in the direction of arrow.
Front Cabinet
B1-1
CP6402
1
CP303
1
CP404
AV/Power/DVD Block
CP5902
Fig. 1-3
1
1
1
1
USB PCB
Fig. 1-4
Advertisement
Table of Contents
