ASROCK TRX40 Taichi Manual page 18

Installation Procedure
1. Remove the five screws holding the bracket in place.
2. Peel off the protective film(s) on the bracket's thermal pad(s) before you install M.2 SSD
module(s).
3. Fasten the five screws holding the bracket in place.
Power off the PC and unplug the power cord. Detach all other cables from the PC.
4. Remove the PC cover.
5. Align and insert the card into a PCI Express 3.0 x16 slot on the motherboard.
Press firmly until the card is securely seated in place.
14