Recording - Philips FW-C38 Manual

All manuals and user guides at all-guides.com
21
FW- C10 MINI HIFI SYSTEM
STANDBY-ON
JOG CD1 • 2 • 3 FM • AM
CONTROL
CD TUNER
TUNING
SEARCH STOP• CLEAR
PROGRAM RECORD DUBBING
SOUND NAVIGATION - JOG
OPEN
TAPE 1
pg 01-29/C38/37-En 21

RECORDING

Notes:
– For recording, use only tape of IEC type
– The tape is secured at both ends with
TAPE 1 • 2 CDR/VIDEO MASTER
VOLUME
TAPE AUX
– The recording level is set automatically,
PRESET
PLAY• PAUSE PREV NEXT
INCREDIBLE
A.REPLAY DIM SURROUND
– To prevent accidental recording, break
•
CLOCK TIMER
– If "CHECK TAPE" is displayed, the
OPEN
PLAYBACK
TAPE 2
One Touch Recording
• For One Touch Recording, as soon as
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in
CD Synchro Start
Recording
I (normal tape) or IEC type II (Cr0 2 ).
1 Load a blank tape into tape deck 2
and a disc into a disc tray.
leader tape. At the beginning and end
2 Press CD to select CD mode.
of tape, nothing will be recorded for six
• You can program the tracks in the
to seven seconds.
order you want them to be recorded
(see Programming Tracks). If not,
regardless of the position of VOLUME,
select the disc by pressing CD (CD
DBB, Incredible Surround, DSC or VEC.
1•2•3) and the tracks are recorded
according to the order on the
out the tab on the left shoulder of the
selected disc.
tape side you want to protect.
3 Press RECORD to start recording.
™ The REC flag starts flashing.
protection tab has been broken. Put a
4 Press Ç to stop recording.
piece of clear adhesive tape over the
opening. Do not cover the Cr0 2 tape
detection hole when covering the tab Dubbing tapes
opening.
to tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select
tape deck 2.
2 Load the prerecorded tape into tape
deck 1 and a blank tape into tape
you press RECORD, the current
deck 2 with full spool to the left.
source (CD, TUNER or AUX) will be
3 Press DUBBING.
recorded on tape deck 2.
™ "DUB" with "2" scrolling right will
be displayed.
• Dubbing will start immediately.
™ The REC flag starts flashing.
™ The REC flag starts flashing.
4 Press Ç to stop dubbing.
TAPE mode, "SELECT SOURCE" will
be displayed. One Touch Recording is
not possible in TAPE mode.
2/16/00, 9:01 AM
(from tape deck 1
3139 116 19811 (ENG)