Table of Contents
Advertisement
All manuals and user guides at all-guides.com
9
A AM Loop Antenna
Connection
Connect the supplied loop antenna to
the AM ANTENNA terminal. Place the
AM loop antenna far away from the
system and adjust its position for the
best reception.
B FM Wire Antenna
Connection
Connect the supplied FM wire antenna
to the FM AERIAL (FM ANTENNA)
300 Ω terminal. Adjust the position of
the FM antenna for the best reception.
Outdoor Antenna
For better FM stereo reception,
connect an outdoor FM antenna to the
FM AERIAL (FM ANTENNA) 300 Ω
terminal using a 300 Ω dipole wire.
FM AERIAL 300Ω
FM ANTENNA 300Ω
OR
pg 01-29/C38/37-En
9
PREPARATION
C Digital Out Connection
E Connecting other
You can record the digital sound from
the CD, through this output, on any
audio equipment with digital input (e.g.
You can connect the audio left and right
CD Recorder, Digital Audio Tape (DAT)
OUT terminals of a TV, VCR, Laser Disc
deck, Digital to Analog Converter and
player, DVD player or CD Recorder to
Digital Signal Processor).
the AUX IN terminals at the rear of the
Connect one end of the cinch cable
system.
(not supplied) to the DIGITAL OUT
socket and the other end to the audio
F Subwoofer Out
equipment with digital input.When
connecting the cinch cable, make sure it
is fully inserted.
Connect the optional active subwoofer
to the SUBWOOFER OUT terminal.
The subwoofer reproduces just the low
D Speakers Connection
bass sound effect (e.g. explosions, the
• Connect the right speaker to Front
rumble of spaceships, etc.). Be sure to
terminal R, with the colored wire to
follow the instructions supplied with the
+ and the black wire to -.
subwoofer.
• Connect the left speaker to Front
terminal L, with the colored wire to
G AC Power Supply
+ and the black wire to -.
• Clip the stripped portion of the
After all other connections have been
speaker wire as shown.
made, connect the AC power cord to
the system and to the wall outlet.
12 mm
unlock
lock
Inserting batteries into the
equipment to your
Remote Control
system
• Insert the batteries (Type R06 or
AA) into the remote control as
shown in the battery compartment.
Connection
• To avoid damage from possible
battery leakage, remove dead
batteries or batteries that will not be
used for a long time. For
replacement, use type R06 or AA
batteries.
2/16/00, 9:01 AM
3139 116 19811 (ENG)
Advertisement
Table of Contents
