New Holland 40 Series Repair Manual page 27

-------------CHAPTER1 - - - - - - - - - - - - -
Right Hand
View
of Engine
10. Disconnect and remove injector fuel
pipes from the fuel injection pump (cap all
exposed openings).
11. Disconnect thermostart fuel pipe on the
intake manifold (cap exposed opening).
12. Disconnect and remove the rocker cover
ventilation tube.
13. Remove the alternator.
14. Disconnect all loam connections on en-
gine harness and secure clear of the en-
gine.
Turbocharger Assembly
1. TurboCharger Housing
2. Oil Feed/Return Tubes
3. Exhaust Manifold
4. Inlet Manifold
5. Inlet Hoses/lubes
9
15. Remove the turbocharger assembly,
Figure 3, ensuring all openings are
capped to prevent dirt ingress. For addi-
tional information on the turbocharger re-
fer to, Fuel Systems, Part 2.
4
Rl-
Water Pump Assembly
1. Gasket 6. Thermostat
2. Connector & 'O' rings
3. Pump Gasket
4. Pump Body
5. Pulley Assembly
7. Gasket
8. Thermostat Housing
9. Temperature Sender
10. Temperature Sender
16. Where applicable remove the water
pump from the engine, Figure 4. For
more information refer to cooling system,
Part 1, Chapter 2.
17. Remove the water pump connector from
the engine cylinder head.
R1-4
Manifold Assembly
1. Inlet Manifold 2. Exhaust Manifold
18. Loosen and remove the manifold bolts
and remove the exhaust manifold and
gasket. Repeat for the inlet manifold and
gasket, Figure 5.