Chicco 06867 M Instructions For Use Manual page 30

timer (n) will show the amount of time remaining for the heating cycle and the on/off touch
button/icon (e) will switch on with a white light to indicate that the cycle is in progress.
When using the product for the first time and every time you wish to change the heating settings,
use the instructions that follow from point 6.
6. Set the heating mode by touching one of the touch buttons/icons available for the different
heating modes (f ):
f1) for rapid heating - This programme is specifically meant for formula.
f2) for slow heating - This programme is specifically meant for breast milk.
f3) for baby food heating - This programme is specifically meant for baby food jars.
The button/icon selected will switch on with a fixed white light, indicating that the setting has been
received.
7. When heating milk (f1 or f2), the buttons/icons used to set the feeding bottle capacity (g) will
blink with a white light indicating that the product is ready to receive a setting.
Set the feeding bottle capacity by touching one of the feeding bottle capacity touch buttons/
icons (g):
g1) minimum capacity (60/150 ml).
g2) intermediate capacity (200/250 ml)
g3) maximum capacity (300/330 ml).
The button/icon selected will light up with a fixed white light indicating that the selection has
been made and the buttons/icons for selecting the starting temperature (h) will blink with a white
light indicating that the product is ready to receive a setting.
If baby food heating mode (f3) is selected the starting temperature buttons/icons (h) will blink
with a white light, indicating that the product is ready to receive a setting, while the feeding bottle
capacity setting will be skipped.
8. Set the food's starting temperature by selecting one of the starting temperature touch buttons/
icons (h):
h1) freezer temperature (about -18 °C)
h2) refrigerator temperature (about 5 °C)
h3) room temperature (about 20 °C).
The button/icon selected will light up with a fixed white light indicating that the setting has been
received, and the feeding bottle with removable base (i) and delayed start (m) buttons/icons will
blink with a white light indicating that the product is ready to receive a setting. The timer (n) will
also switch on and indicate the duration of the selected cycle for a standard feeding bottle (with-
out removable base) or jar. The "+" and "–" buttons/icons (o) will also switch on, allowing you to
adjust the duration of the cycle as needed.
9. To start the selected cycle right away (for standard feeding bottles or jars), press the on/off touch
button (e): an audible signal will be heard, the timer (n) will show the amount of time remain-
ing for the heating cycle and the on/off touch button/icon (e) will light up with a white light
indicating that the heating cycle is in progress. After the options are selected (points 6, 7 and 8),
if three minutes pass without the cycle being activated, the device will emit an audible signal
and switch off automatically.
10. In the event that a feeding bottle with a removable base is used (such as the Chicco Perfect5)
the feeding bottle with removable base button/icon (i) needs to be selected. This button/icon
will light up with a fixed white light and the timer (n) will switch on and indicate the duration of
the selected cycle for this type of feeding bottle. The "+" and "–" buttons/icons (o) will also switch
on, allowing you to adjust the duration of the cycle as needed.
To start the feeding bottle with removable base cycle press the on/off touch button (e), as in point
9: an audible signal will be heard, the timer (n) will show the amount of time remaining for the
heating cycle and the on/off touch button/icon (e) will light up with a white light indicating that
the heating cycle is in progress. After a cycle is selected (point 10), if three minutes pass without the
cycle being activated, the device will switch off automatically.
30