Cutlery Tray - Hotpoint Ariston ELTB 4B019 Operating Instructions Manual

Tip-up compartments with adjustable position
The side tip-up compartments can be positioned at three
the rack.
by inserting the stem of each glass into the corresponding slots.
*

Cutlery tray

Some dishwasher models are fitted with a sliding tray which
can be used to hold serving utensils or small cups. For optimum
washing performance avoid positioning bulky crockery directly
below the tray. The cutlery tray can be removed (see Figure).
Before loading the tray,
make sure the supports are
properly coupled to the up-
per rack (see Figure).
high position to place bulky crockery in the lower rack and low
by creating more space upwards.
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack
may be moved to a higher or lower position.
The height of the upper rack should be adjusted WHEN THE
RACK IS EMPTY.
NEVER raise or lower the rack on one side only.
it up by holding its sides. To restore the lower position, press
the levers (A) at the sides of the rack and follow the rack down.
Unsuitable crockery
crockery. Their decorations are not resistant.
temperatures.
change and fade during the washing process. Some types of
of wash cycles too.
Damage to glass and crockery
Caused by:
Tips:
manufacturer as dishwasher safe.
the wash cycle is over.
*
Only available in selected models.
*
(see figure)
Lift-Up device , lift
EN
23