Shock Information; Ifs Shock Specifications - Polaris 340 CLASSIC 2006 Manual

stops. Backing off 1/4 turn counter-clockwise at this point
should give you the best possible ride ensuring use of the full
travel of the suspension. The opposite procedure should be
used if the suspension is too stiff upon initial set-up.
If bottoming continues after the screw is turned in full
clockwise, the compression spring should be adjusted with the
threaded adjustment collar. Back the screw out to the original
starting position after the compression spring has been
adjusted.
SHOCK PN BRAND
7041535 Arvin
7042258* Arvin
7043054 Arvin
7043141* Fox
7043095* Walker
7043049 Arvin
7043090* Arvin
7041932 Arvin
7041918 Arvin
7042197 Arvin
7043082* Arvin
*=Rebuildable shock
b=IFP depth measured form the bottom of the shock body
t=IFP depth measured form the top of the shock body.
Table 10-2: IFS Shocks
Extended Collapsed
Length (in) Length (in)
13.3 10.64
18.00 11.8
17.97 11.83
18.00 11.80
18.00 11.738
17.02 12.77
17.00 11.20
16.28 12.89
16.35 11.09
17.28 13.78
16.25 12.76
FRONT SUSPENSION/STEERING
Riding conditions are ever changing. Keep in mind the
compression damping adjustable screw can be adjusted at any
time to achieve the best possible ride in any condition.
NOTE: Whenever shocks are replaced or reinstalled
for any reason, the adjustment screw should be
located toward the inside of the suspension. Access
to the adjuster is not possible if installed differently.

SHOCK INFORMATION

IFS SHOCK SPECIFICATIONS

Sho
Stroke ck IFP Depth
(in) Rod (in)
(in)
4.47 .49 N/A
6.2 .49 6.92 t
6.14 .49 N/A
6.20 .50 1.420 b
6.27 .625 2.250
5.75 .49 N/A
5.80 .49 6.54 t
5.15 .49 N/A
5.26 .49 N/A
5.26 .49 N/A
5.25 .49 6.27 t
Shaft PN PSI
N/A N/A
1700228 200
N/A N/A
1500713 200
1800102 200
N/A N/A
1700231 200
N/A N/a
N/A N/A
N/A N/A
1700025 280
10.9