Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
ACHP / ACHT
Screen Size: 33-57"
Max. Weight: 35kg per screen
Revised 22/04/21
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol AVECTA TWIN SCREEN ACHP
Summary of Contents for Unicol AVECTA TWIN SCREEN ACHP
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
-
Page 2: Tools Required
01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED Pozi Head Screwdriver 17mm Spanner 5mm Allen Key 3/16th Allen Key COMPONENTS DESCRIPTION Avecta Large Trolley Base Universal Mount Back Plate 7.5cm Castors (2 standard, 2 braked) Universal Mount Arms 1500mm Columns... - Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Turn the base upside down and push each castor Place the 2 columns with holes, located approx until it clicks into place. Please ensure that the 75mm from the bottom, over the crocodile lugs on castors with brakes are located at the front.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 6 STEP 5 Once placed over columns and at the desired Line the back plate up with the span unit, height, tighten the two grub screws to secure into as shown above. Fix 4x M10x20 screws from place.
- Page 5 01865 767676 sales@unicol.com www.unicol.com STEP 9 STEP 10 Once centered, ensure the bottom screws are not This step will require two people. screwed tight and screw down the top screws to level the screen. Once level tighten bottom screws Once both screens are secure on the backplate, to secure the mount.
-
Page 6: Stand Option
01865 767676 sales@unicol.com www.unicol.com STEP 13 Identify remaining mast in-fill panels. Start from the bottom and clip 2 of the 3 larger rear panels in, threading cabling through where necessary. STAND OPTION STEP 1 STEP 2 Turn the base upside down and push each Place the 2 columns with holes, located approx non-marking rubber foot until it clicks into place.