Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
RH200HD
Screen Size: 71-86"
Guide Max. Weight: 100kg
Revised 22/01/21
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol RH200HD
Summary of Contents for Unicol RH200HD
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
- Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED Pozi Head Screwdriver 4mm & 5mm Allen Keys 19mm Spanner 17mm Spanner COMPONENTS DESCRIPTION Heavy Duty Arms (1x Left, 1x Right) Universal Mount Arms Rhobus Mast (inc. cabinet door) Rhobus Stand Base...
- Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Lying the mast on a flat surface, connect base to Unlock and lift out rear door. Remove upper rear mast as shown. The cabinet door side should be panel by unscrewing 4x M6 screws.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 5 STEP 6 Locate the mounting holes on the back of your Line the screen and arms up with the secured screen. Line the two mounting arms up and using heavy duty arms and offer it up at a slight angle -...