Century KD25 User Manual page 46

JA
Note: After copy, the remaining space in the copied HDD can be used by PC for
EN further partitioning.
6.2 Skip Error
CT
This function sets the volume of errors that is acceptable for you to skip
during the copy process.
Note:
If it's critical that there are no errors on the HDD, then the error counter should be
set to 0.
6.3 Erase Master
This function is to set if erasing the source or not when executing erasing function
6.4 Unknown Format
This function is used to select if copying the areas with unknown format.
6.4.1 Copy Unknown
Copies all the unknown area even if the format is not identified.
6.4.2 Skip Unknown
Skips the unknown format area during copy process.
４３
〈KD25/35HS〉
[Skip Error]
0
[Erase Master]
Disable
[Erase Master]
Enable
[Unknown Format]
Copy Unknown
Enable
[Unknown Format]
Skip Unknown
Enable