Table of Contents
Advertisement
JA
EN
CT
5. Utility
6. Setup
３３
〈KD25/35HS〉
5.2.1 Update BIOS
To update the system firmware via the HDD.
5.2 Update System
5.2.2 Create Update HDD
To
order
5.3 System Info.
This function will show information of the duplicator system, including controller model,
number and software version.
5.4 Read Speed
To show the speed of reading.
5.5 Write Speed
To show the speed of writing.
6.1.1 System and Files
To copy source HDD's data area only.
6.1.2 ALL Partitions
6.1 Copy Area
To copy source HDD's all partitions.
6.1.3 Whole HDD
To copy the whole source HDD.
6.2 Skip Error
Set to ignore error of source HDD while copying.(Selection: 0, 1, 2, 5, 10, 20, 50, 100, 500,
1000, 10000, 65535)
6.3 Erase Master
6.3.1 Disable
To set if erasing
Disable erase source HDD.
source or not.
6.3.2 Enable
Enable erase source HDD.
6.4.1 Copy Unknown
Copy unknown area when the device can not identify the format.
6.4 Unknown For mat
6.4.2 Skip Unknown
Skip copy
identify
Select the proper transfer rate from UDMA2 to UDMA7, UDMA7 is
6.5 Transfer Rate
the fastest.
format the HDD
with
to
quickly save the new firmware in the HDD.
unknown area
the format.
a
2GB
FAT partition in
when
the device can
not
Advertisement
Table of Contents
