urmet domus 1183/2 Quick Start Manual

COMfORT SIgNO DOOR PHONE
Ref.83/2
Signo door phone recalls the style of Signo video door phone.
Designed by architect Citterio, Signo door phone has a perfectly flat
surface harmonized with the absence of corners.
On the front panel there are the button for door opening, backlit by
leds, and 3 buttons for additional services as intercom calls, opening
of the second electric lock, etc.
Signo door phone has an electronic management of the call ring
tone with a loudspeaker dedicated to this function, placed under the
handset. Also the switch used to adjust the call volume with "Mute"
function is hid by the handset.
When the switch is in "Mute" position, a little red flag comes out of the
door phone body to indicate the absence of the call ring tone.
Call voume

BUTTONS fUNCTION

State
Button
Pedestrian
Driveway door
Idle and on
door lock
lock release
hook
release
Pedestrian
Off-hook
Driveway door
door lock
waiting time
lock release
release
(call received)
Pedestrian
Driveway door
Speaking
door lock
lock release
release
Pedestrian Intercom call
Idle and
door lock
(default: not
off hook
release programmed)

TERMINAl PINS DESCRIPTION

}
Line
Bus Line
Line
}
CP
Floor call
CP
}
S+
Additional ringer
S-
2
−−−− sec.4b
COMfORT SIgNO DOOR PHONE
TECHNICAl CHARACTERISTICS - INSTAllATION
Call voume Excluded call
- - - -
- - - -
- - - -
Intercom call Intercom call
(default: not (default: not
programmed) programmed)

TECHNICAl CHARACTERISTICS

Power supply voltage:
Current consumption in standby:
Max. current consumption:
Operating temperature range:
Reference standards:
Max. humidity:
Default values:
All door phones have the following factory default setting:
USER = 127
INTERNAL = 0
Line termination = ON
Line termination
§
For programming procedure, see the section "System installation
and activation".

INSTAllATION

To install Signo door phone perform the following operations:
1. Remove the door phone cover.
2. Fix the base to the wall with the provided screws and screw
anchors.
3. Configure the programming dip-switches and connect the door
phone to the system.
4. Mount again the cover.
36 ÷ 48Vdc
3,0mA max
70mA max
-5°C ÷ +45°C
EN 6000-6-3
EN 6000-6-
90% UR
2 VOICE - Technical Manual