Belt Cover - Janome MC 11000 Service Manual

MC 11000
Changing External Parts (2)
(A)
Replacing the belt cover
To remove:
1. Loosen the screw (A) .
(2)
2. Remove the 2 caps (1) and their screws (B) and (C).
3. While pushig down the stopper (2) under the belt
cover remove the belt cover.
To attach:
4. Match the belt cover position with the front cover.
5. Attach the belt cover while pushing the stopper down.
6. Tighten the 3 screws (A), (B) and (C).
7. Attach the caps (1).
(B)
(C)
( 1 )
www.promelectroavtomat.ru
2