Setting Position Of Parts On Lower Shaft - Janome MC 11000 Service Manual

Setting Position of Parts on Lower Shaft

The setting positions of the parts on the lower shaft are as shown below.
The setting angle of the parts (A), (B) and (C) should be the same as (D).
Spring pin (D)
Feed cam (C)
Cam (B)
Belt wheel
Feed lifting cam
Shield plate
VIEW-X
VIEW-Y
Pin
Cam (A)
Belt wheel setting mark
VIEW-X
Spring pin
VIEW-Y
Spring pin (D)
Pin
www.promelectroavtomat.ru
45