LEGRAND Arteor Instructions

Arteor
TM
Connected switch without neutral
with dimmer option
1. USE
Connected switch without neutral with dimmer option, configured by default as ON/OFF.
Can be combined with one or more wireless lighting controls (dimmer mode can be activated from the Home + Control app).
For local or remote control of your lighting.
Supplied with an active power compensator (Cat. No. 0 401 49), mandatory to ensure optimum operation with commercially-available lamps.
One compensator per lighting circuit is sufficient.
Easy to install in place of a standard switch in a box 35 mm deep (minimum).
Claws and/or screws fixing.
2. RANGE
Product for use in conjunction with the starter pack (5 742 09/18/27/36).
With LED indicator (configuration) and RESET button (hidden) used to return
to factory settings.
Supplied with rocker plate.
3. DIMENSIONS (mm)
B
A B
45 45
4. CONNECTION
Terminal type: with screws
Terminal capacity: 2 x 1.5 mm or 2 x 2.5 mm
2
Stripping length: 8 mm
Flat screwdriver: 3 mm
Technical data sheet: F02619EN/01
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel: +33(0)5 55 06 87 87 - Fax: +33(0)5 55 06 88 88
www.legrand.com
5 742 02
Description
C
D
C D
44.5 10
2
Updated: 03/09/2020
0 401 49
White Champagne
5 742 02 5 742 30
5. OPERATION
OFF when pressed at the top and dimming when held
down until released.
LED indicator:
- useful during installation
- blue LED illumination function can be activated from
the Home + Control app.
ON when pressed at the bottom and dimming when held
down until released.
OFF
RESET button used to return to factory settings
ON
Cat. Nos: 5 742 02/12/21/30
Magnesium Soft Alu
5 742 21 5 742 12
Created: 17/04/2018
1/2