Subscribe to Our Youtube Channel
Related Manuals for Medline MDS89730R
Summary of Contents for Medline MDS89730R
- Page 1 ALUMINUM FRAME BATH STOOL MDS89730R User Instructions and Warranty This Product Contains Dry Natural Rubber. Este Producto Contiene Caucho Natural Seco.
- Page 2 General Warnings To ensure the safe installation, adjustment, and operation of the Bath Stool, these instructions MUST be followed. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY TO THE USER OR DAMAGE TO THE PRODUCT. If you are unable to understand these warnings, cautions, and instructions, contact a healthcare professional or dealer before attempting to use this equipment.
- Page 3 Assembly Instructions Ensure that you have all of the necessary components before assembling your bath bench. • 1 Bench – with preassembled main frame • 4 Aluminum extension legs 1. Turn the bench seat (Figure 2) over to reveal the pre-assembled mainframes. Figure 2 2.
- Page 4 4. Ensure the push button is properly engaged (Figure 5) Figure 5 5. Repeat with the other three leg extensions. 6. Using the Adjustment Pushbutton, adjust the legs to desired height (Figure 6). Figure 6 7. Adjust the height of the bench by first measuring the distance from the back of the user’s knee to the floor.
- Page 5 8. Turn the stool upright and ensure all four rubber tips (Figure 7) rest evenly on the floor. Figure 6 Cleaning The bath bench can be easily cleaned with regular household cleaning products. Use a non-abrasive cleaner with warm water. DO NOT use abrasive powders or scouring pads. Maintenance ...
- Page 6 LIMITED WARRANTY Your Medline product is warranted to be free of defects in materials and workmanship for the duration of use by the original purchaser. This device was built to precise standards and carefully inspected prior to shipment. This limited warranty is an expression of our confidence in the materials and workmanship of our products and assures years of convenient, dependable service.
Need help?
Do you have a question about the MDS89730R and is the answer not in the manual?
Questions and answers