Related Manuals for North-Vision Tech Deluxe-100
Summary of Contents for North-Vision Tech Deluxe-100
- Page 1 Multi-parameter Patient Monitor Deluxe-100, EBM VS-100 User Manual Version: 2.0 Issued by: Sara Lo Date: 5/11/2020 Reviewed by: Albert Huang Date: 5/11/2020 Document No: UM-PM1-201405-01 North-Vision Tech. Inc. 2460...
- Page 2 Part1: General requirements for safety）,and MDD 93/42/EEC. It complies with both international and enterprise standards and is also approved by the Food and Drug Administration, Ministry of Health and Welfare. The Manual is written for the current Deluxe-100, EBM VS-100 Multi-parameter Patient Monitor.
- Page 3 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Instructions to User Dear Users, thank you very much for purchasing our product. Please read the following pages very carefully before using this equipment. Read these instructions carefully before using this monitor. These instructions describe the operating procedures to be followed strictly.
- Page 4 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Before maintenance, please switch off power. This monitor is a professional medical device, can only be operated by trained personnel with qualification. Please peruse the relative content about the clinical restrictions and contraindication.
-
Page 5: Table Of Contents
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. TABLE OF CONTENT CHAPTER 1 OVERVIEW 1.1 FEATURES 1.2 PRODUCT NAME AND MODEL 1.3 APPLICATIONS AND SCOPE 1.4 REQUIREMENT OF OPERATING ENVIRONMENT AND INSTALLATION 1.5 NORMAL WORKING ENVIRONMENT 1.6 IMPACT ON ENVIRONMENT AND RESOURCES 1.7 SAFETY... - Page 6 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.3.1 Screen Description 4.3.2 Operation Instruction 4.4 MODE SELECTION SCREEN 4.5 SPO2 DATA LIST SCREEN 4.5.1 Screen Description 4.6 TREND SCREEN 4.6.1 Screen Description 4.6.2 Operating Instructions 4.7 RECALL SCREEN 4.8 ARR SCREEN 4.9 THE MENU SETUP SCREEN OF THE SYSTEM...
- Page 7 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 6.6 PULSE RATE MONITORING 6.7 DATA RECORDING 6.8 OTHER TECHNICAL SPECIFICATIONS 6.9 CLASSIFICATION CHAPTER 7 PACKAGING AND ACCESSORIES 7.1 PACKAGING 7.2 ACCESSORIES CHAPTER 8 MONITORING PARAMETERS 8.1 MEASURING ECG 8.2 MEASURING THE RESPIRATION 8.3 THE PRINCIPLE FOR MEASUREMENT OF THE BLOOD PRESSURE...
- Page 8 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. VIII...
-
Page 9: Chapter 1 Overview
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 1 Overview 1.1 Features This monitoring system may be used to monitor patient’s ECG, respiratory rate, body temperatures, non-invasive blood pressure (NIBP), pulse oxygen saturation (SpO2), pulse rate and other physiological parameters. -
Page 10: Product Name And Model
Model: Deluxe-100, EBM VS-100 1.3 Applications and Scope This Deluxe-100, EBM VS-100 multi-parameter monitor is a multi-function apparatus designed for monitoring the comprehensive physiological parameters of a patient. With the functions of real-time recording and displaying of patient’s ECG, respiratory rate value, body temperature value, non-invasive blood pressure... -
Page 11: Chapter 2 The Operation And The Patient Monitor
The overall structure of this monitor is shown as Fig.2.1. Deluxe-100, EBM VS-100 patient monitor is a product of modular design. It performs its measurement of the physiological parameter through different modules. There are four functional modules for the monitor: ECG module, NIBP module, SpO module and Central Processing Unit (CPU) module. -
Page 12: Chapter 3 Installation And Connection
North-vision Deluxe-100, EBM VS-100 3 4 5 6 7 Figure 3.1 Deluxe-100, EBM VS-100 Front Panel The patient monitor front panel is shown above: 1 Power switch Press it to turn on the monitor, press it again to turn off the monitor. - Page 13 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. system starts count-down after the alarm silent time is set and will activate the alarm when the count-down ends. The alarm silence time has 4 settings: 2 min, 5 min, 10 min and 20 min, or in alarm.
-
Page 14: Left And Right Side Panel
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 3.1.2 Left and Right Side Panel Figure 3.2 Left panel Figure 3.3 Right panel The built-in printer is on the left panel as shown in Figure 3.2. The right panel of the monitor hosts the patient cable and probe jacks, as shown in Figure 3.3. -
Page 15: Back Panel
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 3.1.3 Back Panel Figure 3.4 Back panel The back panel of the monitor includes the following 1. MONITOR: External monitor port 2. NET: Communication port which is used to network with central monitoring system : Equipotential grounding port 4. -
Page 16: Installation
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 3.2 Installation 3.2.1 Opening the Box and Check 1. Open the packaging, take out the monitor accessories from the box carefully and place it in a safe stable and easy to watch position. -
Page 17: Connection
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 3.3 Connection 3.3.1 ECG Connection ECG measurement is to collect the ECG signal via the ECG electrodes. Electrode connects the patient and the lead. The lead connects the monitor. The locations of the electrodes are very important for obtaining accurate ECG signals. -
Page 18: Blood Pressure Cuff Connection
North-vision Tech. Inc. Safety Instructions for ECG Monitoring Deluxe-100, EBM VS-100 Multi-parameter Patient Monitor can only be equipped with ECG leads provided by our company; using ECG leads supplied by other companies may cause improper performance or poor protection while using defibrillator. -
Page 19: To Connect The Spo2
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Large-sized Adult Cuff 33cm ~ 47cm 17.4cm Prior to use of the cuff, empty the cuff until there is no residual air inside it to ensure accurate measurement. When putting on the cuff, unveil and wrap it around the upper arm evenly to appropriate tightness as shown below. -
Page 20: Temp Transducer Connection
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Figure 3.7 Demonstration of SpO Probe The scenario above will cause inaccurate reading or no readings during SpO measurement. Safety Introductions for SpO Monitoring Continuous use of fingertip SpO sensor may result in discomfort or pain, especially for those patients with microcirculatory problem. -
Page 21: Loading Printing Paper
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Please take out the battery from battery compartment, if it won’t be used for a long time. 3.3.6 Loading Printing Paper This description is for loading paper for the built-in printer. -
Page 22: Chapter 4 Monitoring Screen
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 4 Monitoring Screen 4.1 Main Screen 4.1.1 Date and Time Setup Instead of entering into monitoring screen, it shows the date and time setting screen immediately after the monitor is started, shown as Figure 4.1: Figure 4.1 Date and Time Setup... -
Page 23: Screen Description
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.1.2 Screen Description Figure 4.2 Main Screen Border area: “Alarm”: Alarm status， shows the alarm ON， shows the alarm silence status. “16:27”: alarm silence count down time, the alarm activates automatically after the system finishes counting down. - Page 24 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. “2013-03-05 09:29:54”: System current time and date. The current Figure shows the time and date of March 05 , 2013, 09:29:54. “Push knob for system menu”: System prompt or description for the current status.
- Page 25 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Figure 4.4 NIBP data area NIBP Data: “SYS”, “DIA”, “MAP”: The blood pressure type labels and the measured value. “09:36”: The time of NIBP measuring “mmHg”: The measurement values when the unit is mmHg.
- Page 26 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Mark and Value of PI & PR Figure 4.6 SpO and Pulse Rate Data Area “SpO ”: SpO label，the “99” on the right side is the current SpO value being measured.
-
Page 27: Display2 Screen
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.2 Display2 Screen 4.2.1 Viewing Screen Choose Obsev of Disp2 on system setup screen, press the DISP key to enter the monitoring screen, as shown in Figure 4.9. Figure 4.9 Viewing Screen In this screen, press the DISP key to switch the ECG lead, or press the Print key to print the ECG waveform and the second waveform. -
Page 28: Freeze And St Analysis Screen
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.3 Freeze and ST Analysis Screen In the main screen, press the Freeze key to freeze three channel ECG waveforms or all the waveforms on the screen, as shown in Figure 4.10. -
Page 29: Operation Instruction
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.3.2 Operation Instruction between the ST segment value and the referenced value. The value is displayed after the measure on “ST + 0.000 mV”. The operation is carried out in 4 steps. -
Page 30: Spo2 Data List Screen
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.5 SpO2 Data List Screen Move the gray cursor to SpO List in the mode selection screen, and press Navigation Knob to enter into data list screen, displays in the same position shown as Figure 4.13. - Page 31 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Figure 4.15 HR Trend Graph Figure 4.15 is the ECG trend graph. There are 3 options on the right of the graph, as described below. The “12” on the top shows the trend graph time. Move the cursor to the trend time, press the knob and rotate the knob.
- Page 32 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Figure 4.16 Respiration Trend Graph Figure 4.17 Body Temperature Trend Graph Figure 4.18 SpO2 Trend Graph Figure 4.19 PR Trend Graph Figure 4.20 NIBP Trend Graph Figure 4.21 EtCO2 Trend Graph...
-
Page 33: Operating Instructions
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.6.2 Operating Instructions Rotate the knob, choose the parameter and press the knob. Review the trend graph and move the cursor to the Exit button to exit the trend graph. 4.7 Recall Screen Move the cursor to “RCALL”... -
Page 34: Arr Screen
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Figure 4.24 waveform Recall Rotate the knob to move forward and backward of the recalled waveform. Press the knob to exit the waveform recall and return to the initial state of the waveform recall screen. -
Page 35: The Menu Setup Screen Of The System
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Start: This button is used to start and end the system arrhythmia detection. When the ARR is not ON, the learn key is disabled. Press this key and the system enters learning mode. The Start changes to Close. - Page 36 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Figure 4.27 System Parameter Settings Type: The subject being monitored, this can be chosen among Adult, Infant, and Neonate patient. The factory default is “Adult” When changing the patient type, the system will perform initiation of the alarm settings, NIBP settings.
-
Page 37: System Parameter Settings
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.9.2 Print Parameter Settings Figure 4.28 Print Parameter Settings Print: Choose to open the printer function, The default is “ON”. Timer: Regular printing time, The options are “OFF、1、2、3…240 Minute”, Chose a time “XX” minutes,... -
Page 38: Respiration Parameter Settings
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. OPE: Operation. Deep filtering. It can filter out strong interference. Pace: Cardiac pacemaker detection. When Pace is “ON”, a mark will be displayed on the ECG waveform if the patient fitted with a cardiac pacemaker. The factory default is OFF. -
Page 39: Temperature Parameter Settings
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.9.5 Temperature Parameter Settings Figure 4.32 Temperature settings TEMP Hi : Temperature 1 upper alarm setting, adjustable 0.1 – 60.0°C (32.1 - 140.0°F) Lo : Temperature 1 lower alarm setting, adjustable 0 – 59.9°C (32.0 - 139.8°F) Unit：Temperature unit. -
Page 40: Spo2 Parameter Settings
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. initP.: initial pressure of nibp measurement. Test gas leakage: This option provides the cuff with test leak with turning the rotary knob will highlight the cursor position in the test leak position rotary knob will leak testing, test results and blood pressure zone. -
Page 41: Rest
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Switch.: CO2 monitoring switch. Of the CO2 monitor, select "open", otherwise "off"; recommend that users do not use CO2 monitoring is set to "OFF" to reduce power consumption, extend the CO2 module lifetime. -
Page 42: Color Settings Screen
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4.10 Color Settings Screen Color Menu Exit SpO2 NIBP RESP TEMP Back Figure 4.36 Color Setting Screen In this screen, rotate the knob to choose the color, press the knob and rotate it to change the color. When the appropriate color is chosen press the knob again to save it. -
Page 43: Chapter 5 Instruction For Ibp
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 5 Instruction for IBP If your monitor has IBP monitoring function, please follow the instructions below to perform IBP monitoring on patient. 5.1 IBP Transducer Connection 1. On the left panel are indicated two upper and lower holes (single or dual IBP), which are the sockets for IBP cables. -
Page 44: Ibp Monitoring Screen
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 5.2 IBP Monitoring Screen Figure 5.2 IBP Monitoring Screen Waveform area 3 waveform: IBP1 waveform 4 waveform: IBP2 waveform Data area Figure 5.3 Invasive Blood Pressure Data Area - 36 -... -
Page 45: Ibp Graphic Trend
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 5.3 IBP Graphic Trend Figure 5.4 IBP1 Trend Graph Figure 5.5 IBP2 Trend Graph - 37 -... -
Page 46: Ibp Parameter Settings
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 5.4 IBP Parameter Settings Figure 5.6 IBP1 Parameter settings Figure 5.7 IBP2 Parameter settings 0 Calibration：After connecting the pressure transducer to pressure switcher and communicate with the air outside, then do operation. Move the cursor to this option and rotate the Navigation Knob to select “proceed”... -
Page 47: Ibp Calibration
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Systolic pressure High: The upper alarm limit of IBP 1/2 value. Low: The lower alarm limit of IBP 1/2 value. Diastolic pressure High: The upper alarm limit of IBP 1/2 value. - Page 48 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 2. Plug: Connect the plug to the IBP socket on the monitor. 3. Dome: One end is connected to the blood vessels to be measured via aqueduct (or tube for transfusion).
-
Page 49: Cautions Operation
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 7. 100mmHg Calibration: Adjust the stopcock (Off to the channel of the air) after the 0 calibration. Press “100mmHg” on the transducer, and enter the system menu. Move the cursor to the “100mmHg”, then press the Navigation Knob and rotate it. -
Page 50: Chapter 6 Technical Specifications
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 6 Technical Specifications 6.1 ECG Monitoring 1. Input signals range in amplitude: ± 0.5 mV ~ ± 3mV 2. Heart rate display range: 10bpm ~ 300 bpm 3. Heart rate display accuracy: ± 1% or ± 2 bpm, whichever is greater. -
Page 51: Spo2 Monitoring
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 5. Overpressure protection limit Adult: 300 mmHg pediatric: 300mmHg Neonate: 140 mmHg 6. NIBP measurement range: Systolic： 20 mmHg〜290 mmHg Diastolic：10 mmHg〜260 mmHg MAP： 15 mmHg〜275 mmHg 7. NIBP accuracy: Systolic： ± 5mmHg or ±3% Diastolic：±5 mmHg or ±3%... -
Page 52: Classification
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 6.9 Classification Safety standard IEC 60601-1 The type of protection against electric shock ClassⅠequipment. The degree of protection against electric shock Type BF, CF applied parts Electro-Magnetic Compatibility Group I, Class A... -
Page 53: Chapter 7 Packaging And Accessories
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 7 Packaging and Accessories 7.1 Packaging The product is packed in high quality corrugated cartons with foam inside to protect the equipment against damage in the shipping and handling process. -
Page 54: Chapter 8 Monitoring Parameters
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 8 Monitoring Parameters 8.1 Measuring ECG The electrocardiogram (ECG or EKG) is primarily a tool for evaluating the electrical events within the heart. The action potentials of cardiac-muscle cells can be viewed as batteries that cause charge to move throughout the body fluids. -
Page 55: Measuring The Respiration
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 8.2 Measuring the Respiration The respiration or pulmonary function refers to the process of breathing, air exchange, transporting oxygen to the tissues and cells, and collecting carbon dioxide from the tissues and cells. - Page 56 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. may disappear suddenly? The following explanations are devised to give the answers. The oscillating method vs. the Korotkoff-souna method Blood pressure measurement by the oscillating method and Korotkoff-souna method has good correlation with the invasive measurement.
-
Page 57: Measuring The Blood Pressures
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 8.4 Measuring the Blood Pressures 8.4.1 Operational Tips Like common non-invasive blood pressure measurement, improper operation may cause inaccurate or no result, or misunderstanding of the measuring information when the oscillating method is used to take the measure of blood pressure. - Page 58 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 5. When the subject is suffering from major hemorrhage, hypovolemic shock and other conditions with rapid blood pressure change or when the subject has too low body temperature, the reading will not be reliable, for reduced peripheral blood flow will lead to reduced arterial pulsation.
-
Page 59: Measuring The Pulse Oxygen Saturation And Pulse Rate
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 8.5 Measuring the Pulse Oxygen Saturation and Pulse Rate This monitor measures the pulse oxygen saturation and the pulse by means of the radiograph of infrared light and the red light emitted by LED through body’s peripheral areas (such as fingers), whereby the photoelectric detecting circuits will analyze the absorption of the oxy-hemoglobin and reduced hemoglobin respectively, and give the photo-absorption rates before and after pulsation. -
Page 60: Chapter 9 Maintenance
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 9 Maintenance The multi-parameter patient monitor should be properly maintained to ensure its maximum performance and long service life. In addition to the warranty period of one year, the company also offers long-term service for each customer. -
Page 61: Cleaning, Sterilization And Disinfection Of The Monitor
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. In order to avoid damaging the battery, do NOT use other power supply device to charge the battery; After battery ageing phenomenon occurring, do NOT throw the battery into fire to avoid explosion risk. -
Page 62: Cleaning, Sterilization And Disinfection Of Accessories
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 4．If it is installed in a cabinet, make sure the installation allows for good ventilation, and easy to maintain, observe and operate. 9.4 Cleaning, Sterilization and Disinfection of Accessories It is recommended to clean the accessories (including sensor, leads and plugs) with a piece of gauze which has been soaked in 75% Alcohol or 70% Ispropanol. -
Page 63: Chapter 10 Troubleshooting
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 10 Troubleshooting Note: To troubleshoot this machine in the service, follow the instructions below to eliminate the problem first. If the attempt fails, refer to the dealer in your local area or the manufacturer. The service should be performed by a professional electrician. -
Page 64: Chapter 11 Appendix
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Chapter 11 Appendix 11.1 Abbreviation of Arrhythmia 1. ECG TACHY 2. ECG BRADY 3. ECG ARREST 4. MISS BEAT 5. VE EARLY 6. SVE EARLY 7. VE COUPLET 8. SVE COUPLET 9. -
Page 65: Other Terms And Messages
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. 11.2 Other Terms and Messages “Cuff error” － cuff is not wrapped correctly, or is not connected “Air leak” － Pneumatic component, tubing or cuff leaks “Pressure error” － Unstable cuff pressure or tangled cuff tubing “Signal weak”... - Page 66 User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc. Manufacturer North-vision Tech. Inc. Address: 1st Fl., No.15, Gongye E. 2nd Rd., East Dist., HsinChu City 30075, Taiwan R.O.C. International Sales North-vision Tech. Inc. Address: 1st Fl., No.15, Gongye E. 2nd Rd., East Dist., HsinChu City 30075, Taiwan R.O.C.