Advertisement
Table of Contents
DW-520
Step 1) Connect the pump to the hose on the inside of the fountain.
Step 2) Connect the LED lighting cord, located inside the fountain, to the transformer.
Step 3) Run power cords through the back of the fountain and slide the back panel into place.
Step 4) Fill your fountain with water (approximately 2.5 gallons), making sure the pump is fully submerged.
Step 5) Plug the power cords into power outlets.
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor DW-520
Summary of Contents for Sunnydaze Decor DW-520
- Page 1 DW-520 Step 1) Connect the pump to the hose on the inside of the fountain. Step 2) Connect the LED lighting cord, located inside the fountain, to the transformer. Step 3) Run power cords through the back of the fountain and slide the back panel into place.
- Page 2 IMPORTANT CARE NOTICE • Fill fountain with sufficient water to ensure the pump is fully submersed. • Clean and top-off the water on a regular basis. • Always turn off power before cleaning and maintaining the pump. • Never allow the fountain pump to run dry as this will cause damage and void the warranty. •...
Need help?
Do you have a question about the DW-520 and is the answer not in the manual?
Questions and answers