Specifications - Sony MHC-F150 Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS:
U.S.A. models:
MHC-F250AV
POWER5 OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
MHC-F150
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
North American models:
MHC-F250AV:
Front Speaker:
Continuous RMS power output
Total harmonic distortion
Center Speaker:
Continuous RMS power output
Rear Speaker:
Continuous RMS power output
MHC-F150:
Continuous RMS power output
European models:
The following measurd at AC 230 V, 50 Hz
DIN power output (Rated)
Continuous RMS power output (Reference)
56
100 + 100 watts
(8 ohms at 1 kHz,
10% THD)
less than 0.09%
(8 ohms at 1 kHz,
40 W)
25 watts
(8 ohms at 1 kHz,
10% THD)
12.5 + 12.5 watts
(16 ohms at 1 kHz,
10% THD)
100 + 100 watts
(8 ohms at 1 kHz,
10% THD)
50 + 50 watts
(8 ohms at 1 kHz, DIN)
60 + 60 watts
(8 ohms at 1 kHz,
10% THD)
Other models:
The following measured at AC 120/240 V, 50/60 Hz
Continuous RMS power output (Rated)
Continuous RMS power output (Reference)
Peak music power output (Reference)
The following measured at AC 110/220 V, 60 Hz
Continuous RMS power output (Rated)
Continuous RMS power output (Reference)
Inputs
VIDEO/MD IN:
(phono jacks)
MIX MIC (except for Australian and European
models): (phone jack)
Outputs
VIDEO/MD OUT:
(phono jacks)
PHONES:
(stereo phone jack)
SPEAKER:
MHC-F250AV:
MHC-F150:
MHC-FR10 (European models):
MHC-FR10 (Other models):
REAR SPEAKER:
MHC-F250AV:
MHC-F150:
CENTER SPEAKER
MHC-F250AV:
SUPER WOOFER:
110 + 110 watts
(8 ohms at 1 kHz,
1% THD)
130 + 130 watts
(8 ohms at 1 kHz,
10% THD)
1500 watts
90 + 90 watts
(8 ohms at 1 kHz,
1% THD)
110 + 110 watts
(8 ohms at 1 kHz,
10% THD)
voltage 250 mV/450 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
voltage 250 mV
impedance 1 kilohms
accepts headphones of 8
ohms or more
accepts impedance of 8 to
16 ohms
accepts impedance of 8 to
16 ohms
accepts impedance of 8 to
16 ohms
accepts impedance of 8 to
16 ohms
accepts impedance of 16
ohms
accepts impedance of 16
ohms
accepts impedance of 8
ohms
Voltage 1 V, impedance 1
kilohms