Dj Effects; Looping Part Of A Cd; Flashing Part Of A Cd - Sony MHC-F150 Operating Instructions Manual

DJ Effects

Looping part of a CD

— Loop
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
(Power)
/
Press and hold LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal play.
To adjust the loop length
Turn the jog dial while holding LOOP to
select different loop lengths (LOOP 1~20).
Or press > or . while holding LOOP on the
remote (for MHC-F250AV) or press LOOP on
the remote repeatedly (for MHC-F150/
MHC-FR10) to select different loop lengths.
40
Jog dial LOOP

Flashing part of a CD

— Flash
With the flash function, you can "flash" the
CD sound during playback. This lets you
create original recordings.
(Power) Jog dial
/
Press and hold FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal play.
To adjust the flash length
Turn the jog dial while holding FLASH (or
(MHC-F250AV only) press > or . while
holding FLASH on the remote) to select
different flash lengths (FLASH 1~20).
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the
same time.
Notes
• The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
• To record the flash effect, use the analog (VIDEO/
MD OUT) connections or this unit's tape deck.
FLASH