The Display - Sony MHC-F150 Operating Instructions Manual

1
Press TUNER/BAND repeatedly
until the band you want appears in

the display.

The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM n MW n SW
or
FM n MW n LW
2
Press and hold + or – until the
frequency indication starts to
change, then release.
Scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo program) appear.
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
NEXT
PLUS ONE
DELETE CD TEXT
TEXT DISC GROUP
FILE
HI-LIGHT
1 2 REC SLEEP
TUNED DBFB
MANUAL
AUTO SUR
PRESET
SYNC TRACK ART MONO STEP STEREO
DOLBY NR RELAY
kHz
GROUP
MHz 1 2
FILE
3
Press TUNER MEMORY.
A preset number appears in the display.
NEXT
DELETE CD TEXT
FILE
HI-LIGHT
1 2 REC SLEEP
4
Turn the jog dial to select the preset
number you want.
5
Press ENTER.
The station is stored.
6
Repeat steps 1 to 5 to store other
stations.
To tune in a station with a weak
signal
Press + or – repeatedly in step 2 to tune in the
station manually.
To change the preset number
Start over from step 1.
To change the AM tuning interval
(Except for the European model)
The AM tuning interval is factory set to 9 kHz (10
VOLUME
kHz in some areas). To change the AM tuning
3 4 5
interval, tune in any AM station first, then turn off
the power. While holding down the ENTER button,
turn the power back on. When you change the
interval, AM preset stations will be erased. To reset
the interval, repeat the same procedure.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
Preset number
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
PLUS ONE
TEXT DISC GROUP SYNC TRACK ART MONO STEP STEREO
TUNED DBFB
MANUAL
AUTO SUR
PRESET
VOLUME
DOLBY NR RELAY
kHz
GROUP
MHz 1 2 3 4 5
FILE
11