Removing Cds - Sony MHC-F150 Operating Instructions Manual

5
Insert a disc with the label side
facing right.
Notes
• Make sure you have inserted the disc into each
slot at a right angle to the rotary table. If the disc
is not put in straight, it may damage the player
or the disc.
• Make sure the rotary table comes to a
complete stop before inserting or removing
discs.
With the
label side
facing right
6
Repeat steps 4 and 5 to insert more
discs.
7
Close the front cover by pushing the
right edge of the cover until it clicks.
The rotary table turns and the disc slot at
the loading position is set to the playing
position.
Always close the front cover except
when you insert or remove discs.

Removing CDs

After following Steps 1 to 3 of "Inserting
CDs" on page 12, remove the discs. Then
close the front cover.
Notes
• Do not insert an empty 8 cm (3-inch) CD adaptor.
It may damage the player.
• Do not attach anything such as seals or sleeves to
CDs. It may damage the player or the disc.
• If you drop a disc into the player and the CD
won't go into the slot correctly, consult your
nearest Sony dealer.
• When transporting the player, remove all discs
from the player.
• If you want to remove the disc played, press
ENTER after opening the front cover. The disc
comes to the loading position. Remove the disc
after the rotary table comes to a complete stop.
Tips
• To play the disc you want independently, see
"Playing your favorite CD independently".
• You can display the original Disc Memos instead
of the disc numbers (see "Labeling a CD") to
locate it easily when you start playing.
When you select a CD-TEXT disc, the disc title is
displayed instead of the disc number.
13