Gaggia Multix style PROFESSIONAL Instructions For Use Manual page 32

FITTING THE STIFF INSERTS (Z AND Z BIS)
ONTO THE BRISTLED FRAME (Z ) (Fig. 18)
To fit the stiff inserts (Z
carpets onto the bristled frame (Z
the appropriate guides with the tabs facing inwards.
FITTING THE BRISTLED INSERTS (Z AND Z BIS)
ONTO THE BRISTLED FRAME (Z ) (Fig. 18a)
Install the bristled insert (Z
rear guide of the frame (Z
with alternate bristles to the front guide of the frame (Z
shown in Figure 18a.
FITTING THE BRISTLED FRAMES (Z and Z )
ONTO THE MULTIPURPOSE BRUSH (T) (Fig. 19)
To fit the desired frames (Z
simply lay the selected frame against the brush body and
press until the little lever (4) snaps into position in the slot (5)
located on the universal element (12) of the multipurpose
brush (T).
To remove the frame, release the lever (14) from the universal
element (12) of the multipurpose brush (T).
Before attempting to clean any carpets or textiles,
discharge any condensation that may be left in the
appliance by pressing the red switch (10) located on
the handle (9) of the work hose (Q) (Fig. 13).
All manuals and user guides at all-guides.com
e n g l i s h
3
2
and Z BIS) for fitted and non-fitted
3 3
), introduce the inserts into
2
4
2
) with continuous bristles to the
4
) and the bristled insert (Z
2
and Z ) onto the brush body (T),
1 2
NOTE
3
Z
3
4
Fig. 18
BIS)
4
), as
2
1 2
Fig. 18a
Fig. 19
30
BIS
Z
2
Z
2
4
5
Z
3
Z BIS
4
Z
4
T-12