Gaggia Multix style PROFESSIONAL Instructions For Use Manual page 27

PRECAUTIONS TO BE TAKEN WHEN USING THE MACHINE
Before using the Steam Generator / Suction cleaner / Iron, read these instructions care-
fully. Under no circumstances shall the manufacturing Company be held responsible for
any damage to people or property that may be caused by a failure to follow the instruc-
tions given below or by improper use of the equipment.
- Make sure that the mains electrical installation (230 V 50Hz) is
provided with earthing and automatic safety switch as required by
the relevant regulations in force. (Fig 1)
- Do not tug at the supply lead or at the appliance itself to remove
the plug from the wall socket (Fig 2)
- Unplug the appliance before filling the tank with water.
- Do not use the appliance in rooms saturated with gas
- Do not vacuum flammable, explosive or corrosive substances.
- Do not use distilled water. Do not introduce detergents or chemi-
cals in the boiler.
- Allow water in the boiler to cool down before emptying the
boiler.
- Make sure that the fill-up cap (E) is properly tightened; this is to
avoid any steam leakage.
- Do not leave the appliance running unattended; ALWAYS switch
it off before moving away from it.
- Before attempting to carry out any maintenance or cleaning ope-
ration, ALWAYS remove the plug from the power supply socket.
- Do not touch the appliance with wet hands or feet when the
machine is plugged.
- Never immerse the appliance in water or liquids. Use a damp
cloth to clean. Avoid using solvents or detergents as these may
damage the outer finish.
- Do not under any circumstances aim the steam jet at other
people, animals or electrical appliances, as the temperature of
steam is very high. (Fig.3)
- Should extension leads be used, make sure that they are suitable
for the electric load in use. This is to ensure that no danger is posed
for the operator or for the overall safety of the room where the
appliance is used. Inadequate extension leads can result in
appliance malfunction.
- If you need to replace the temperature relief valve or the lead, or
in case of appliance failure or malfunction, contact the dealer or
an authorised service engineer. Do not attempt to disassemble the
appliance.
- The machine produces steam at output temperatures that can
reach 130°C. Avoid any contact with the skin (Fig. 3a)
- The maximum power fed by the socket is 800W (Fig. 3b)
All manuals and user guides at all-guides.com
e n g l i s h
25
230 V
Fig. 1
Fig. 2
Fig. 3
Fig. 3a
Fig. 3b