Advertisement
PREPARATION
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and Wrench.
1
A
H1
H1
A
G
Step 1: attach the Right arm side (A) to the Right seat (C) ,Top back
(G) as shown the picture.Using the Allen nut (H1) to tighten all with
the Allen key (H3) and the Extra bolt (H2) as shown on the picture.
Make sure to tighten all the Allen nut (H1) before continue to step 2.
H3
H1
H1
H2
H1
H1
H1
H1
H1
C
H1
2
H1
H2
H1
H1
Step 2: Put the Support back (I) to the Right arm side (A) then
attach the Right side (B) to the Right seat (C) ,Top back (G)
and the Support back (I) as shown on the picture . Using the
Allen nut (H1) and tighten with the Allen key (H3) and the Extra
bolt (H2) .
H1
H1
H1
H1
B
C C
G
A
I
H1
Advertisement
