Led Behavior - Zte MC7010 Quick Start Manual

LED Behavior

When setting up the MC7010, the LED will have the following behavior.
Indicator
POWER
Red blinking
NETWORK
Green blinking
LAN Green blinking
SIGNAL
(Three
lights)
NOTES:
• All light indicators will be switched off automatically after the device operates
normally for about 15 minutes. If indicators need to be solid, you could change
their settings from the configuration web page of the 5G CPE.
• When a problem occurs, indicators will be automatically lighted up again to
help you check the device status. After the problem is resolved, indicators will
be turned off immediately.
Status
Power is on and external power supply is working
On
normally.
Off Power is off.
The device is in error status:
•
•
•
The device is registered or connected to the 5G
Green on
network and data is being transferred.
The device is connected or connected to the
3G/4G LTE network and data is being transferred.
Green on The LAN port is connected.
Data is being transferred.
Off The LAN port is not connected.
Three lights show the signal strength. More lights
On
on means better signals.
Off There is no signal or no nano-SIM card is inserted.
Description
The device is not registered to the mobile
network.
There is no nano-SIM card inserted.
There is no network service available.
19