Zte MC801A Quick Start Manual

Hide thumbs Also See for MC801A:

Table of Contents

Download this manual

1) Signal Indicators: Steady white lights from all 3 indicator lights (from top to bottom) show

signal strength. The more the lights are on, the stronger the signal. If the lights are off, it

may mean that the signal is weak, there is no signal detected or no SIM card has been

inserted.

• Steady red light: No network, no SIM card inserted, no network service or other

problems.

• Steady blue light: Registered or connected to a 3G or LTE network.

• Steady white light: Registered or connect to a 5G network.

• Steady white light: WLAN is working normally.

• Light is blinking: WPS function is on.

• Light is off: The WLAN function is off.

• Steady white light : The external power supply is connected and the MC801A's power

supply is working.

• Light is off: The device is off.

5) WPS button: Short press to turn on the WPS function. Long press (for about 10 seconds)

to turn it off.

Table of Contents

Need help?

Do you have a question about the MC801A and is the answer not in the manual?

Page 1 • Light is blinking: WPS function is on. • Light is off: The WLAN function is off. 4) Power Indicator • Steady white light : The external power supply is connected and the MC801A’s power supply is working. • Light is off: The device is off.
Page 2 • Reset hole: Long press for about 3 seconds to restore the MC801A to its factory settings. How to install the SIM card Using a nano SIM, insert the SIM card into the MC801A’s card slot in the direction shown until it clicks into place. How to turn on the MC801A After connecting the power adapter, the device will automatically start and connect to the internet.
Page 3 Should you wish to reconfigure the modem, you can log in to the device management page of the MC801A to change the default settings. 1. Check the product label at the bottom of the device to get the device management page IP address and log in details.