Kogan 9 Series User Manual page 9

3.
Put your hands on the washer diagonally, press and shake the washer slightly to make
sure that the washer is steady.
Connecting the Supply Hose
1.
Check that sealing washers are firmly seated.
2.
Attach the curved end of the hose to the inlet valve of the washing machine,
Tighten the coupling nuts securely by hand.
3.
Attach straight end of the hose to the tap. Tighten the coupling nuts securely by
hand.
4.
Turn on the taps and check for leaks. Tighten the coupling nuts firmly if there is
any leakage. If water pressure is strong, close the water tap completely then open
it slightly.
Sealing Washer
Tap
Tap End
Inlet Hose
Twist
9