3.
Put 2-3L50-degree hot water into tub.
4.
Assemble the inlet pipe again, open the water tap and start the machine. At last,
please examine whether the inlet pipe and drainpipe can work normally.
Clean Filter of Pump (One-time monthly suggestion)
1.
Press the groove of pump.
The cover of filter can be opened.
(Attention: If there is hot water in the machine, please wait for cooling and then
open the filter.)
2.
Take out the filter anticlockwise.
3.
Wash the filter with water.
4.
Assemble the filter into the pump clockwise.
Attention:
1.
The filter should be assembled tightly to avoid water leakage.
2.
Please don't clean the filter when the machine is working.
22
The groove of pump cover
Put 2-3L 50°C hot
water into tub.