Playing Tracks Repeatedly - Sony SCD-555ES Operating Instructions Manual

Playing Tracks Repeatedly

Z
You can play an entire disc or portions thereof repeatedly.
This function can be used with Shuffle Play to repeat all
the tracks in random order (page 17), or with Programme
Play to repeat all the tracks in a programme (page 17).
You can also repeat a specific track or portion within a
track.
REPEAT
H
Note
If you turn off the player or disconnect the mains lead, the player
will store the last setting of repeat play ("REPEAT" or "REPEAT
1") and recall it the next time you turn on the player. However,
the setting of the Repeat A-B Play will be cancelled if you turn off
the player or disconnect the mains lead.
Repeating all the tracks on the disc
(Repeat All Play)
Press REPEAT once, then press H.
"REPEAT" appears in the display and Repeat All Play
starts.
The repeat play changes depending on the play mode you
select.
When the play mode is The player repeats
Normal play (page 11) All the tracks in sequence
Shuffle Play (page 17) All the tracks in random order
Programme Play (page 17) All the tracks in the programme in
sequence
To stop Repeat All Play
Press x.
To resume normal play
Press REPEAT repeatedly until "REPEAT" goes off.
16
GB
AyB
x
Repeating the current track
(Repeat 1 Play)
While the track you want to repeat is being played,
press REPEAT repeatedly until "REPEAT 1" appears in
the display.
Repeat 1 Play starts.
To stop Repeat 1 Play
Press x.
To resume normal play
Press REPEAT repeatedly until "REPEAT" goes off.
Repeating a specific portion within a
track (Repeat A-B Play)
You can specify one portion within a track to be played
repeatedly. Note that the portion that you specify must be
within the boundaries of a single track.
1
While the player is playing, press AyB at the
starting point (point A) of the portion to be played
repeatedly.
"REPEAT" appears and "A" flashes in the display.
2
Continue playing the track (or press M) to locate
the ending point (point B), then press AyB.
"REPEAT A-B" appears and Repeat A-B Play starts.
To stop Repeat A-B Play and resume normal play
Press REPEAT or x.
z
You can set a new starting point and ending point during
Repeat A-B Play
You can change the current ending point to a new starting point,
then specify a new ending point to repeat another portion right
after the current portion.
1 During Repeat A-B Play, press AyB.
The current ending point changes to the new starting point
(point A).
"REPEAT" lights up and "A" flashes in the display.
2 Locate the new ending point (point B) and press AyB.
"REPEAT A-B" lights up and the player starts to repeat the
newly specified portion.
When you want to restart from the starting point A, press H
during AyB repeat.