Advertisement
03-7. Flux cleaning method of PC board
There is no need to clean this product.
If cleaning, pay attention to the following points to prevent the negative effect to the
product
(1)In order to keep the solvent purity and to enhance cleaning, prepare equipments
such as boil, ultrasonic cleaning with cold solvent and vapor washing.
(2)Keep the cleaning solvent clean and prevent the connector contacts from
contamination.
(3)Some cleaning solvents are strong and they may dissolve the molded part and
characters, so pure water passed liquid solvent is recommended
(4)When cleaning by alcohol solvent, pay attention that the face of molded part may
become white.
Please contact us, when using other solvents.
Panasonic Corporation
industrial.panasonic.com/ac/e/
Operation manual for Narrow-pitch connectors A35US
©
- 23 -
Panasonic Corporation 2015
ACCTF14E-3
201509
Advertisement
