Sony PCWA-DE30 Quick Start Manual page 10

With the utility software
When the Wireless LAN Converter is connected to an access point other than
the PCWA-A320, you cannot use the Quick Setup switch to configure the
Wireless LAN Converter. For details, see Configuration with the Utility
Software below.
You can use the utility software to configure the Wireless LAN Converter even if it is
connected to the PCWA-A320.
Configuration with the Quick Setup Switch
When the Wireless LAN Converter is connected to the PCWA-A320, you can
use the Quick Setup switch to configure it. When the Wireless LAN Converter
is connected to another type of access point, see Configuration with the
Utility Software below.
Procedure 1 - Completing the Access Point setup
Refer to the documentation of your Access Point for details about how to
complete the setup. If your Access Point data encryption (WEP) is not
configured, we strongly suggest that you configure it before proceeding.
Procedure 2 - Performing a Quick Setup
1 Wait until the PCWA-A320, and the Wireless LAN Converter starts.
2 Press the Quick Setup switch of the PCWA-A320 Wireless Unit for at least
one second.
When the status indicator on the PCWA-A320 starts flashing red, it is ready
for Quick Setup.
The Wireless LAN Converter only remains in Quick Setup standby mode for
30 seconds.
Press the Quick Setup switch one more time for at least one second to
cancel the procedure.
3 Press the Wireless LAN Converter Quick Setup switch for at least one
second.
When the Status indicator on the PCWA-A320 stops flashing red and the
Wireless LAN Converter begins flashing white, quick setup is complete.
4 Turn off the Wireless LAN Converter.
Procedure 3 - Connecting the Wireless LAN Converter to the
device that you want to use for wireless communication
1 Connect the Wireless Unit and Power Unit.
2 Connect the Power Unit to the computer or other device capable of
wireless communication using an Ethernet cable.
9