Advertisement
Step 2:
Orient and align the Pump Cover,
as shown, in-line with the
mounting 2 points shown in (red
colour), and slip-in the Bush – 2
off, and Original Screw – 2 off.
Copyright By SRC
Design and Specification are subjected to change
Mounting Drawings
Step 3
Secure the threads in the
Mounting points and ensure the
Inside surfaces of the Pump Cover,
is not fouling with the Body of the
Rear Brake Pump.
Step 1:
The Rear Pump Brake, before
mounting of SRC's Guard, We
can remove 2 original Screw in
motorbike. (As shown)
Page 2
Advertisement
