Connecting A Sound System; Connecting A Universal Serial Bus (Usb) Device - Sony VGC-RC204 User Manual

Table of Contents

Advertisement

User Guide

Connecting a sound system

Your new PC allows you to enjoy your DVDs and audio files with the unbeatable experience of surround sound. There are 3 audio
ports on the back of the unit to make a connection to your home cinema system via your amplifier. 1 port makes a connection to
the centre speakers, another port to the front (left and right) speakers and the third port to the rear (left and right) speakers.
Please read the online Specifications (http://www.vaio-link.com/specifications/specifications.asp?l=en) for the exact location of the
audio ports, as well as the documentation provided with your amplifier/home cinema equipment for connection information.

Connecting a Universal Serial Bus (USB) device

You can connect a USB device such as a scanner, a floppy disk drive or a printer, to your VAIO desktop.
To connect a USB device, simply plug in the USB cable of the device into one of the
USB devices are hot plug and play devices. You do not need to shut down your computer prior to connecting these devices
unless the manual supplied with the device states otherwise.
For some USB devices you need to install the software before you connect the device. Not following this procedure might cause
the device not to work properly. For more information, check the manual provided with the USB device.
Connecting peripheral devices
ports on your computer.
n N
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vaio vgc-rc series

Table of Contents