Connecting The Wireless Keyboard And Mouse - Sony VAIO SVJ202 Series Service Manual

4-2. Connecting the Wireless Keyboard and Mouse

For connecting method, please refer to the guide in the Keyboard/Mouse box. For connecting method please refer to the guide in the Keyboard/Mouse box
Throw away the guide when operation was completed.
To connect the wireless keyboard
Use the supplied wireless mouse and follow these steps to connect the supplied wireless keyboard
with your computer. You can perform the connection operations using an optional USB keyboard as
well.
When the Windows password is set on your computer, you can use the on-screen keyboard for
password entry to start the computer. When the power-on password is set on the computer,
however, the on-screen keyboard is not available for password entry and you need an optional USB
keyboard.
1. Make sure that the supplied battery is properly installed on your wireless keyboard, and then slide
the power switch on the keyboard to the OFF position the power switch on the keyboard to the OFF position
2. Turn on the computer.
3. If the computer has multiple user accounts, select the one with administrative rights. If the
Windows password is set on your computer, click
select the Type without the keyboard (On-Screen Keyboard) check box, and click OK. Then,
enter the Windows password with the on-screen keyboard and click
If the typed password does not appear in the password entry field, click the field to show a blinking
cursor, and then enter the password once again cursor and then enter the password once again
4. Wait until the Windows starts, and then click Start
5. Double-click Local Disk (C:), WConnectTool, and WConnect.
If the User Account Control window appears, click Yes.
6. Wait until the utility window for re-connection appears, and then slide the power switch on the
wireless keyboard to the ON position.
It may take a while before the utility window appears
7. Wait until the utility window notifies that the wireless keyboard should now be working, and then
close the utility window.
at the bottom left of the computer screen,
.
and Computer.
To connect the wireless mouse
Use the supplied wireless keyboard and follow these steps to connect the supplied
wireless mouse with your computer. You can perform the connection operations using wireless mouse with your computer You can perform the connection operations using
an optional USB mouse as well.
1. Make sure that the supplied battery is properly installed on your wireless mouse,
and then slide the power switch on the mouse to the OFF position
2. Turn on the computer.
3.If the computer has multiple user accounts, press the
one with administrative rights and press the Enter key one with administrative rights and press the Enter key
4. Wait until the Windows starts, and then press the Windows key on the wireless
keyboard to display the Start menu.
5. Enter wconnect and press the Enter key. If the User Account Control window
appears, press the or key to select Yes and press the Enter key.
4- -2
(EN ND)
or key to select the
[Sony Confidential]
SVJ202 Series (9-890-930-XX)