Table of Contents
Advertisement
User Guide
Before using the keyboard
Before attempting to use the wireless keyboard, you must enable communication
between the computer and the keyboard. 4 AA batteries, for use in the wireless
keyboard, are supplied with your VAIO.
To connect the wireless keyboard, proceed as follows:
1
Insert the 4 AA batteries into the wireless keyboard as shown (1).
2
Connect the receiver to a USB connector on the main unit (2).
3
Turn on the computer.
4
Slide the power switch on the right-hand side of the keyboard to turn on the
keyboard (3).
5
Press the CONNECT button on the receiver (4).
6
Turn the wireless keyboard over and press the CONNECT
button (5). You need to press the CONNECT button within 30 cm of the receiver!
Communication between the wireless keyboard and the computer is now active.
✍
If your wireless keyboard does not operate properly, the batteries may need to be replaced. To avoid battery
leakage, switch off the wireless keyboard when not used for an extended period of time. Always use new batteries from the same brand.
If you want to put the keyboard in a more 'ergonomical' position, open the keyboard feet.
n N
14
Using your VAIO computer
Advertisement
Table of Contents
