Table of Contents
Advertisement
User Guide
Before using the mouse
Before attempting to use the wireless mouse, you must enable communication between the computer and the mouse.
Two AA batteries, specific for use in the wireless mouse,
are supplied with your VAIO.
To connect the wireless mouse, proceed as follows:
1
Turn the wireless mouse over and slide the power
button to the OFF position (1).
2
Insert the two specific AA batteries into the wireless
mouse as shown (2).
3
Make sure the wireless receiver is connected to a USB
connector (3) on the main unit.
4
Turn on the computer.
5
Turn the wireless mouse over and slide the power
button to the ON position (4).
6
Press the CONNECT button on the wireless receiver (5).
7
Press the CONNECT button on the underside of the mouse (6). Press this button within 30 cm of the receiver.
Communication between the wireless mouse and the computer is now active.
✍
Steps 6 and 7 must be carried out within 10 seconds of each other.
If your wireless mouse does not operate properly, the batteries may need to be replaced. To avoid battery leakage, switch off the wireless
mouse when not used for an extended period of time. Always use new batteries from the same brand.
n N
21
Using your VAIO computer
Advertisement
Table of Contents
