Panasonic MC-7650 Service Manual page 21

9.11. Power Cord
Removing:
1. Take out the cord reel assembly. (Refer to the procedure for
the cord reel assembly.)
2. Remove the claw of card reel supporting the rail base.
(Fig.18)
3. Insert a screwdriver from the side of the cord and push up
the rail base. (Fig.19)
4. Pull out the rail base from the side of the cord. (Fig.20)
Assembling:
1. Fit the rail base unit attached to new power cord into the
cord reel. (Fig.20)
2. Hook the rail base on the claw of the cord reel and secure
it. (Fig.18)
3. Wind the cord on the cord reel. (Wind it according to the
direction indicated on the plate of the springs.
When winding in the reverse direction, the spring should be
broken.)
4. Assemble it according to the assembling procedures for the
cord reel assembly.
21
MC-7650 / MC-7630 / MC-7610
Fig.18
Fig.19
Fig.20